$31.49

Directions: To Remove Heads and Cutters: 1. Grip the cutter head housing and pull upward from shaver. 2. Remove the cutter retainer assembly by unscrewing the center screw know from the cutter head housing. 3. Remove the head/frame assembly by pulling it out of the housing. To Replace Heads and Cutters: 1. Replace the new cutter and head frames making sure that the frames are placed into the housing with the head from pins and the cutter frame locating holes aligned as indicated. 2. Tighten the screw know to hold frames in place. 3. Close the housing assembly. Make sure the housing is latched or clicked into place. 4. Make sure to keep the plastic head guard in place while shaver is not in use to protect heads.